Optimization of high endoglucanase yields production from polypore fungus, Microporus xanthopus strain KA038 under solid-state fermentation using green tea waste

ABSTRACT Polypores are diverse macrofungi that have been extensively studied for their lignocellulolytic enzyme production capabilities. Currently, these enzymes are being used for many industrial purposes. However, the high cost associated with their production is the main barrier to their broader application. This work aimed to study the optimal medium and conditions for endoglucanase production using solid state fermentation. Seven polypore strains were used for endoglucanase activity screening. The fermentation experiments were carried out in 250 ml Erlenmeyer flasks with green tea waste as a substrate. Notably, Microporus xanthopus strain KA038 showed the best level of activity (38.62 IU/gds). Various parameters such as moisture content, nitrogen source, initial pH value, inoculum size and incubation time were considered to determine the optimal conditions for endoglucanase production. The optimal medium consisted of green tea leaves as a carbon source, beef extract as an organic nitrogen source, NH4H2PO4 as an inorganic nitrogen source, pH 7.0 and an incubation temperature at 30°C for 4 days resulted in a high enzyme yield with M. xanthopus strain KA038 (81.8 IU/gds). This article has an associated First Person interview with the first author of the paper.


INTRODUCTION
Lignocellulosic biomass is mainly formed of three polymers; cellulose, hemicellulose and lignin along with other components (Isikgor and Becer, 2015). Despite the usefulness of these materials in many sectors of the economy, a great amount of the lignocellulosic biomass ends up being discarded and becomes a pollutant (Vintila et al., 2009). On the other hand, lignocellulose biomass is a source material that has been used in previous decades in the production of bioethanol, organic acids, enzymes and biodegradable plastics in the form of cheap carbohydrates (Ravindran and Jaiswal, 2016). Lignocellulosic material is promising as an energy source because of its potential for lowcost fermentation (Sherief et al., 2010). Green tea is considered one of the most popular drinks in the world and the custom of drinking tea has spread quickly and widely throughout the world (Kondo et al., 2004). According to Kirci (2006) and Tutus et al. (2014), green tea residues are composed of 26.53±0.58% alpha cellulose, 29.42±0.57% cellulose, 60.81±1.14% holocellulose and 36.94± 0.34% lignin. However, a substantial amount of tea waste is left after the tea extraction process. Thus, looking elsewhere to minimize or eliminate tea waste has been a difficult task in the tea processing industry . Hence, at present, the elimination of tea waste in the environment in an economically sound and efficient manner has become of significant interest among scientists.
In contrast with submerged fermentation (SmF), solid state fermentation (SSF) is a procedure wherein the substrate is fermented and barely appears in water. The low moisture content in the fermentation of microorganisms is limited primarily to yeasts, fungi and bacteria (Acharya et al., 2010). One of the most adaptive organisms to SSF is fungi because the fugal hyphae features are spread across the surface and easily penetrate inter particle spaces, thereby their colonization is typically more efficient than other organisms in solid substrates (Sukumaran et al., 2005).
Polypores (basidiomycetes) are a group of wood-decaying fungi that are diverse in ecological specificity and morphological characteristics. Most polypores are capable of breaking down lignocellulose, and consequently they play a mainstay role in nutrient recycling in forest ecosystems. Although some polypores can cause tree diseases such as Onnia tomentosa, Phaeolus schweinitzii and Phellinidium weirii (Ginns, 2017), others have medicinal properties (Jayachandran et al., 2017). Notably, the ability of polypores to produce enzymes has attracted the attention of scientists. In recent years, researchers have become interested in the screening and production of cellulolytic enzymes from polypores (Table 1), and the resulting research has shown positive results. Zecarias et al. (2016) screened ligninocellulolytic enzymes by the dye decolorization plate test, with 49 of 61 fungal strains showing decolorizing activity on Phenol Red, Azure B and RBBR agar. The exoglucanase and β-glucosidase production were induced using the co-culture between Trichoderma viride and Ganoderma lucidum in SSF (Shahzadi et al., 2014). Cellulase is an enzyme that converts cellulose into simple sugars (glucose) (Chinedu et al., 2005). Many studies have reported that microorganisms and animals are able to hydrolyze β-1,4 linkages in cellulose (Henrissat, 1991). The production rate of cellulase obtained from fungi is higher than from other microorganisms and this can be advantageous (Rana and Kaur, 2012). Generally, complete cellulose hydrolysis is responded to by three main types of cellulase combinations including endoglucanases, exoglucanases and β-glucosidase (Zhang and Lynd, 2006). These enzymes are widely used in numerous application areas including the beverage, paper and textile industries, in agriculture, detergents and animal feeds, as well as serving as an important alternative source of energy generation. Some organic compounds are inducers for cellulase such as disaccharides, spent ammonium sulphite liquor (Han et al., 2017) and glycerol (da Silva Delabona et al., 2016). This research study aims to explore the isolation of polypore fungi and the production of endoglucanase enzyme.

Fungal identification
In this study, the polypore samples were collected based on their distinct morphology. A total of seven strains were selected from dead logs (Fig. 1).
Based on the morphological characteristics, five strains (KA007, KA009, KA012, KA016 and KA038) were classified into the genus Microporus. The strain KA018 and KA053 were classified into the genus Hexagonia and Favolus, respectively. The molecular results were used to confirm the fungal identification.
A phylogram indicated that all fungal isolates in this study were placed within the family Polyporaceae (Fig. 2). Five fungal strains were placed into the genus Microporus, within which the strains KA007, KA009, KA012 and KA016 were identified as Microporus affinis and the strain KA038 was Microporus xanthopus. Additionally, the fungal strain KA018 was identified as Hexagonia tenuis. The remaining fungal strain, KA053, was placed in the genus Favolus, which forms a sister taxon to Favolus grammocephalus and Favolus emerici.
Screening of endoglucanase production ability First screening: plate screening using carboxymethyl cellulose (CMC) as carbon source The first screening of endoglucanase production was performed using the Congo Red test. This test was based on the measurement of colony growth and hydrolysis halos were used for enzymatic index (EI) calculation. The production of the halos by cellulose hydrolysis was directly related to the region of action of cellulolytic enzymes, as the stain only remains attached to β-1,4-Dglucanohydrolase bonds (Lamb and Loy, 2005). The seven fungal strains showed the halo zone on CMC agar. The results showed that the strain KA016 showed the highest degree of enzymatic index at 1.5 ( Fig. 3 and Table 2).
Second screening: screening of endoglucanase production ability in liquid medium All strains were positive for endoglucanase production and were able to grow in CMC agar, but the strains differed in their ability to produce endoglucanase (Table 3 and Fig. 4A). The strain KA016 revealed the highest EI value (1.49) in agar diffusion method, the strain KA053 revealed the highest endoglucanase activity (0.65 U/ml) in liquid fermentation, whereas KA009 indicated the  smallest clear zone diameter (EI 1.12) and the lowest endoglucanase activity (0.01 U/ml). As a result, only strain KA009 was not considered for further studies.
Third screening: screening on substrate by solid state fermentation The different degrees of potential to produce endoglucanase of various strains was studied by testing the activity of enzyme  For the M. xanthopus strain KA038, the optimal moisture content was 75% and activity was recorded at 38.62 IU/gds (Fig. 5A). The lower or higher moisture content in the solid state fermentation did not help to increase endoglucanase activity. The results indicated that only at 75% of moisture content lead to an increase in endoglucanase activity.

Effect of nitrogen source
The result of the effect of various nitrogen sources on endoglucanase production is illustrated in Fig. 5B and C. Among the different nitrogen sources, the highest degrees of endoglucanase production were 43.5 IU/gds and 46 IU/gds, when beef extract was added as an organic nitrogen source and NH 4 H 2 PO 4 was added as a source of inorganic nitrogen, respectively.

Effect of pH value
The effect of pH on endoglucanase production was determined at pH values ranging from 4.0-12.0 and shown in (Fig. 5E). Green tea waste revealed a maximum endoglucanase activity of 49.9 IU/gds, which was observed at pH 7.0. There was drastic dropped in endoglucanase activity from pH 8.0 onward.

Effect of the amount of fungal inoculum
Maximum activity was noted with ten discs of inoculum amount of the inoculated strain (Fig. 5D). By increasing the inoculum amount, an increase in enzyme activity was recorded. The maximum endoglucanase activity recorded was 51.27 IU/gds with ten discs of inoculum. The results from five, seven and ten discs of fungal inoculum were not significantly different, statistically, however, using ten discs of fungal inoculum showed the highest potential to produce endoglucanase (51.27 IU/gds), whereas five and seven discs of fungal inoculum showed 49.97 and 49.14 IU/gds, respectively. In this research, optimal conditions were a priority.

Effect of incubation time
The results revealed that the maximum endoglucanase activity (81.8 IU/gds) was observed at an incubation time of 4 days for M. xanthopus strain KA038. The enzyme activity gradually increased with a decrease in incubation time up to the optimum level, followed by a gradual fall in activity (Fig. 5F).

DISCUSSION
The examination of endoglucanase activity was carried out by staining the isolates of the fungus with Congo Red. This method can definitely be applied for screening endoglucanase producing fungal strains. In this research, all the isolates -Favolus sp. strain KA053,  In Congo Red staining, the enzymatic halo changed from red to opaque orange. Accordingly, the Congo Red method can be used as a rapid test, a sensitive reaction for screening endoglucanase-producing fungi. However, dye screening methods are not a quantitative method for analyzing enzyme activity through halo size. This problem was overcome by using short cellooligosaccharides that modified the chromogenic/fluorogenic groups, e.g. fluorescein, resorufin and 4-methylumbelliferone, leading to higher sensitivity and quantification (Fia et al., 2005). Enzyme activity of produced endoglucanase without substrates was measured in units/ml. One unit was designated as the quantity of endoglucanase enzyme released 1 μmol of reducing sugars commensurate to glucose per 1 min during the reaction. In this study, some strains showed big and clear halo zones (high EI), but their potential to produce endoglucanase that could be measured by a secondary screening was inconsistent, demonstrating that either the enzyme concentration producing these strains was lower or higher after cultivation in the liquid medium, or that the potential of the strains to excrete endoglucanase was not good. Sadhu and Kanti have shown that the hydrolyzing zone diameter may not be the direction of the real cellulolytic enzyme activity (Sadhu and Kanti, 2013).
Moisture is an essential factor in the SSF process. Consequently, this adjustment has a significant influence on growth, microbe biosynthesis and secretion of metabolites such as enzymes. It has been reported that the production of enzymes was negatively affected in instances of increased or decreased moisture. Ahmed (2008) and Sodhi et al. (2005) claimed that the crucial factor influencing the outcome of SSF is the moisture content of the substrate, and that the reduction of nutrients provided to the organisms resulted in lower moisture content. On the other hand, high moisture caused a reduction in enzyme production that may have been due to the substrate porosity reduction; the structure of substrate particles changed, the gas volume decreased and microbial growth was reduced (Baysal et al., 2003). This result was achieved in an upscale screening on the substrate by solid state fermentation, and a better result was observed than with other moisture content levels. The optimal moisture content of 75% was used for further experiments.
The nitrogen source plays a role as a secondary energy source for the organisms; they are important for producing industrial fermentation mediums that are designed to ensure maximum enzyme production. In this experiment, different inorganic and organic nitrogen sources, which have an influence on the level of fungal growth and enzyme production, were screened at 0.1% concentration. Our results indicate that the nitrogen source strongly affected endoglucanase enzyme production. The results show that good endoglucanase production can be obtained with both organic nitrogen sources (such as beef extract, malt extract and ammonium compound) and inorganic nitrogen sources [such as NH 4 H 2 PO 4 , NH 4 NO 3 and (NH 4 ) 2 SO 4 ]. But enzyme production was remarkably decreased in the presence of tryptone, yeast extract, peptone, urea and NaNO 3 . These are in accordance with submitted papers that have presented the idea that ammonium compounds are the most prosperous nitrogen sources for endoglucanase synthesis. However, even though the addition of organic nitrogen sources such as beef extract and malt extract resulted in increased enzyme productionas was reported beforebecause of their higher cost they were not an effective replacement for inorganic nitrogen sources (Tao et al., 1999). Regarding the physical parameters, the pH of the growth medium plays an important role by inducing morphological changes in polypore fungi and in enzyme secretion. Every enzyme shows maximum activity at a certain pH. There has been much work that attempts to achieve the maximum cellulolytic enzyme productivity by optimizing pH value (Li et al., 2013;Teixeira Da Silva et al., 2016). The enzyme was still active over a wide pH range and it was observed that the endoglucanase activity had a broad pH range of between 4.0-12.0. This was due to the fact that cultivation of fungi at an unfavorable pH value may result in reduced enzyme activity by reducing the accessibility of the substrate (Bakri et al., 2008). In the SSF process, for optimizing the initial pH precautionary measures were taken due to the fact that extracellular enzymes were only stable at a particular pHs, and there may be rapid denaturation at lower or higher values. Notably, the metabolic activities of the microorganism are very sensitive to changes in pH because pH affects the cellulolytic enzyme production of fungi (Kalra and Sandhu, 1986).
A lower amount of inoculum requires a longer time for the colonies to multiply to a sufficient number to utilize the substrate and produce the enzyme. An increase in the number of colonies in the inoculums would ensure rapid proliferation and biomass synthesis. Finding a balance between the increasing biomass and accessible nutrients would yield optimal enzyme production (Ramachandran et al., 2004). Higher inoculum size might accelerate the fungal growth rate but at the same time increase the rate of nutrient depletion. Upon nutrient depletion the growth of the fungi is affected and this might not be helpful in improving the yield of cellulolytic enzyme production (Kumaran et al., 1997). In this study, endoglucanase production increased together with an increase of initial inoculum size ranging from one to ten discs in inoculated strains. Maximum cellulase production (51.27 IU/gds) was observed at an inoculum of ten discs in inoculated strains. Higher inoculum levels (>ten discs) increased the colonies' density per gram of solid substrate; this factor hindered the penetration of oxygen into the solid medium, inhibiting endoglucanase production. However, a lower inoculum size of the colonies' culture extended the time required for the fermentation process. Notably, there is an indispensable factor influencing the optimal inoculum amount in SSF because smaller inoculations can be short of biomass and allow unexpected organism growth, whereas a high inoculation may tend to be full of biomass and deplete the necessary nutrients (Bogar et al., 2003). Irrespective of SSF or SmF, inoculum amount can greatly influence the yield of the final product (Prakasham et al., 2006).
Fermentation time has an important impact on enzyme production; enzyme production is related to incubation time (Gautam et al., 2011). The time course for the production of endoglucanase enzyme was investigated and a fermenting for a period of 1-24 days was carried out. As shown in Fig. 5, maximum endoglucanase activity was found after 4 days, where the maximum activity was 81.8 IU/gds. A further increase in the incubation period leads to a decrease in the production of endoglucanase. The decrease in enzymatic activity with time might be due to the depletion of macro-and micronutrients in the fermentation medium over time, which stressed the fungal physiology resulting in the inactivation of secreting machinery in the enzymes (Haq et al., 2010). Another reason may be the high viscosity of the medium, which decreases the oxygen supply to the microorganisms. High viscosity leads to retarded cell division, resulting in low production and excretion of cellulase (Haque and Mozaffar, 1992). This trend of decreased enzyme activity may have been due to the depletion of macro-and micronutrients in the fermentation medium over time, which stressed the fungal physiology resulting in the inactivation of the secretary machinery of the enzyme (Rajendran et al., 2015).
The potential of utilizing green tea waste as a substrate for endoglucanase production under SSF by isolated polypore fungi was identified and studied. The following were found to be the optimum SSF conditions for 5 g of substrate for M. xanthopus KA038: incubation at 30°C, moisture content at 75%, using beef extract and NH 4 H 2 PO 4 as sources of nitrogen and an optimum pH of 7.0. The incubation time of 4 days produced the best endoglucanase activity, which increased from 51.27 IU/gds to 81.8 IU/gds. In this study, endoglucanase activity increased by 1.6-fold after a one factor at a time optimization procedure was employed using M. xanthopus KA038. The previous research using green tea wastes for solid state Fig. 4. Screening and evaluation of potential endoglucanase activity producing polypore strains using liquid media by DNS assay (A). Endoglucanase activity by polypore fungi on green tea waste substrate by DNS assay (B). The different letters in each graph indicate a significant difference. fermentation for cellulase production by Trichoderma reesei was 6.27 IU/gds (Mao et al., 2015), so our result was 13-fold times better. Compare with Ramapraba (2004); this research used M. xanthopus to produce cellulolytic enzymes by SmF using paddy husks as substrate and the results indicated that the highest cellulase activity (0.98 mmol/min/mg) was achieved after 6 days of incubation using 6 g of yeast extract as a nitrogen source. However, because of the higher cost, using a large amount of organic nitrogen source such as yeast extract was not the most efficient method for industrial enzyme production. Our research did not show the best result of endoglucanase production, however, it indicated the potential of polypore fungi M. xanthopus strain KA038 to produce better cellulolytic activity compared with other polypore fungi such as Melanoporia sp., Pycnoporus sanguineus, Pycnoporus coccineus and Coriolus versicolor (Montoya et al., 2015;Onofre et al., 2015;Chuwech et al., 2016;de Oliveira et al., 2016). Thus, this result demonstrated that M. xanthopus was a remarkable species of polypore fungi in producing endoglucanase activity.

Fungal collection and pure culture isolation
Basidiocarps of polypore fungi were collected from dead tree stumps in Chiang Mai Province, Thailand, from December 2016 to July 2017. Tissue culture technique was employed to isolate the fungi. The inside tissues from each basidiocarp were then placed on potato dextrose agar (PDA) plate and then incubated at 30°C in an incubator. The cultures were purified by repeated transfer to fresh PDA plate every 7 days. Basidiocarps were dried at 40-45°C. The dried specimens were then deposited in the herbarium at the Sustainable Development of Biological Resources Laboratory, Chiang Mai University.

Fungal identification
Macro-morphological characteristics of the hymeneal surface were observed using fresh specimens, based on fresh material and documented all aspects of size, shape, color and textural features (Hesler and Smith, 1979). The pertinent micro-morphological features were recorded using both stereo microscope and light microscope. For phylogenetic analyses, the sequences from this study, previous studies and the GenBank database were used and are provided in Table 3. The multiple sequence alignment was carried out using MUSCLE (Edgar, 2004). The combined ITS, LSU and rbp1 sequence dataset consisted of 37 taxa and were comprised of 3268 characters including gaps (ITS: 1-660, LSU: 661-2012 andrbp1: 2013-3268). Phylogenetic trees were constructed using maximum likelihood (ML) and Bayesian inference (BI) algorithms, implemented by RAxML v7.0.3 (Stamatakis, 2006) and MrBayes v3.2.6 (Ronquist et al., 2012), respectively. Ceriporia cystidiata and C. lacerate were used as outgroup. For ML analysis, the bootstrap (BS) replicates were set as 1000 and used to test phylogeny (Felsenstein, 1985). Clades with BS values of ≥70% were considered significantly supported (Hillis and Bull, 1993). For the BI analysis, the Markov chains were run for one million generations, with six chains and random starting trees. The chains were sampled every 100 generations. Among these, the first 2000 trees were discarded as burn-in, while the post-burn-in trees were used to construct the 50% majority-rule consensus phylogram with calculated Bayesian posterior probabilities. Bayesian posterior probabilities (PP)≥0.95 were considered as significantly supported (Alfaro et al., 2003).

Screening of endoglucanase production ability
First screening: plate screen using CMC as carbon source Fungal colonies (0.5 cm diameter) from 1-week-old PDA plates were cut by pasture pipette and then inoculated into the middle of the CMC agar plates. The plates were then incubated at ambient temperatures (28±2°C) for 3 days. The plates were colored with 0.1% (w/v) Congo Red for 0.5-1 h and discolored for 15-20 min with 1 M NaCl solution. Finally, 1 M NaCl was discarded and the plates were washed with water at a pH of 2.0. The staining of the plates was analyzed by observing the formation of clear or yellowish zones around the fungal colonies. Endoglucanase production ability was revealed by the size of a clear halo that was considered to be indicative of the zone of hydrolysis. This area was measured for EI calculation by dividing the diameter of the hydrolysis zone by the diameter of the colony (Béguin and Aubert, 1994).
Second screening: screening of endoglucanase production ability in liquid medium Endoglucanase production ability of seven fungal strains was checked using the DNS method (Miller, 1959). Inoculum was prepared by inoculating 0.25 ml solution from 7-day-old fungal culture in PDB at 30°C with 180 rpm shaking. Supernatant was collected after 3 days of incubation and centrifuged at 10,000 rpm for 10 min at 4°C. The reaction mixture containing 0.5 ml of the sample, 0.5 ml of sodium citrate buffer and 0.5 ml of 1% (w/v) CMC was then incubated at 37°C for 60 min. The reaction was ended by adding 1 ml of DNS reagent. The color was then increased by boiling for 5 min. The measurement of optical density was performed at 540 nm (Miller, 1959).
Third screening: screening on substrate by solid state fermentation Green tea waste was procured from Amazing Tea Chiang Mai Company, Chiang Mai, Thailand. It was ground using a blender. Citrate buffer was prepared by mixing sodium citrate and citric acid and the pH was adjusted to 5.0. All chemicals were of the highest reagent grade commercially available.
Endoglucanase production was studied in flasks containing 5 g of green tea waste as a substrate containing 20 ml of distilled water with moisture content at 75%. The flasks were then sterilized at 121°C for 15 min. The strains were grown on PDA plates for 7 days and added to fermentation medium as an inoculum. The flasks were incubated at 30°C for 7 days. The fermented substrate of each flask was extracted using 50 ml of 50 mM citrate buffer ( pH 5.0) and filtered through the sterilized cloth in an ice bucket. The crude extract was centrifuged at 8000 rpm for 5 min, the supernatant was collected and used as a crude enzyme. The reaction mixture after that was used for the endoglucanase assay using the DNS method (Miller, 1959). The enzyme blank was also carried out in flasks containing 5 g of green tea waste containing 20 ml of distilled water. The flasks were then sterilized at 121°C for 15 min. The flasks were incubated at 30°C for 7 days. The fermented substrate of each flask was extracted using 50 ml of 50 mM citrate buffer ( pH 5.0) and filtered through the sterilized cloth in an ice bucket. This crude extract was centrifuged at 8000 rpm for 5 min, the supernatant was collected and used as enzyme blank to measure the supernatant's color.
Optimization of conditions for endoglucanase production by selected fungal strain in solid state fermentation Fungal strain The highest endoglucanase-producing strain (M. xanthopus strain KA038) was selected and used in this experiment.

Effect of moisture content
The moisture content optimization was determined. Three flasks containing 5 g of dried green tea waste and five discs of inoculum were adjusted to different moisture contents of 40, 50, 60, 70, 75 and 80%, adding water at 8, 10, 13, 15, 20 and 25 ml, respectively. The moisture content percentage was calculated using the subtraction of wet sample weight and dry sample weight, then divided by wet sample weight, finally multiplied with 100. The flasks were then inoculated at 30°C for 7 days. The endoglucanase activity was measured using the DNS method. The optimal moisture content was selected for further experiment.

Effect of nitrogen source
Five organic nitrogen sources ( peptone, beef extract, yeast extract, malt extract and tryptone) and five inorganic nitrogen sources [urea, NaNO 3 , (NH 4 ) 2 SO 4 , NH 4 NO 3 and NH 4 H 2 PO 4 ] at 0.1% (w/v) concentration were added into 125 ml Erlenmeyer flasks that contained 5 g of dried green tea and adjusted to optimal moisture content (75%). Five discs of fungal strain were inoculated. The flasks were incubated for 7 days at 30°C and enzyme assay was then performed using the DNS method. The optimal nitrogen source was selected for further experiment.

Effect of pH value
The optimized pH value was performed by adjusting the pH to 4.0, 5.0, 6.0, 7.0, 8.0, 9.0, 10.0, 11.0 and 12.0 of the optimal medium containing green tea waste using 0.1 N HCl or 0.1 N NaOH. After inoculation with five discs of inoculum, the flasks were incubated in an incubator at 30°C for 7 days and enzyme assay was then performed using the DNS method. The optimal pH was selected for further experiment.

Effect of the amount of fungal inoculum
The inoculum amount was optimized by preparing the inoculum on PDA plates containing fungal strain using a sterile pasture pipette of 0.5 mm in diameter. Green tea waste containing fermentation media was inoculated with one, three, five, seven, ten, 12 and 15 disc(s) of the strain aseptically. After inoculation, the flasks were incubated at 30°C for 7 days. At regular intervals, the enzyme assay was performed. The optimal inoculum dosage was selected for further experimentation.

Effect of incubation time
To determine the effect of incubation time on endoglucanase enzyme production, the flasks contained the optimal conditions in previous steps were inoculated with the selected strain and incubated for different numbers of days (1, 2, 3, 4, 10, 14, 18 and 24 days). The enzyme activity was determined at 540 nm using the DNS method.

Statistical analysis
All experiments were carried out in triplicate, and all the endoglucanase activities were reported as the mean±standard deviation of three identical values. To compare the data, analysis of variance (ANOVA) was performed using SPSS 17.0. The comparison between the mean values was done using the Duncan multiple range test with a significance level of P<0.05. The optimization of variables carried out by one factor at a time design.